Nest Protection

hotoelectric smoke sensor (opto) is suitable for most applications giving the fastest response to slow burning or smouldering fires which give rise to large visible smoke particles.

Opto-heat sensor will respond better to fast clean burning fires yet maintain the advantage of optical sensors when detecting smouldering fires. The thermal enhancement of this sensor allows a higher alarm threshold which provides a greater rejection of false alarms. The sensor will also give an alarm at temperatures above 135°F.

Rate of rise with fixed heat sensor settings will detect a rapid increase in temperature or temperatures above 135°F and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.

Fixed heat sensors settings will detect temperatures above 135°F or 194°F and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions. For photoelectric and opto-heat operation the sensor automatically compensates for gradual increase in the scatter signal due to contamination e.g. dust build up.

Features

• Built-in short circuit isolators
• Stylish low profile design
• 360º viewable LED design
• Removable detector chamber
• Drift compensation

Benefits

• Plug and play - no hard addressing required
• 'Clean me' feature means sensor can be cleaned on site using Eaton's manual cleaning procedure
• The programmable heat sensor reduces the number of parts required in the system

 

InformationName : Optical Detector, Cooper Industries plc, ADI India, CooperCategory : Addressable Detector, Fire, Products, Smoke Detector

hotoelectric smoke sensor (opto) is suitable for most applications giving the fastest response to slow burning or smouldering fires which give rise to large visible smoke particles.

Opto-heat sensor will respond better to fast clean burning fires yet maintain the advantage of optical sensors when detecting smouldering fires. The thermal enhancement of this sensor allows a higher alarm threshold which provides a greater rejection of false alarms. The sensor will also give an alarm at temperatures above 135°F.

Rate of rise with fixed heat sensor settings will detect a rapid increase in temperature or temperatures above 135°F and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.

Fixed heat sensors settings will detect temperatures above 135°F or 194°F and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions. For photoelectric and opto-heat operation the sensor automatically compensates for gradual increase in the scatter signal due to contamination e.g. dust build up.

Features

• Built-in short circuit isolators
• Stylish low profile design
• 360º viewable LED design
• Removable detector chamber
• Drift compensation

Benefits

• Plug and play - no hard addressing required
• 'Clean me' feature means sensor can be cleaned on site using Eaton's manual cleaning procedure
• The programmable heat sensor reduces the number of parts required in the system